3D Foot Fit

FIT WORKBENCH
Polski
English 日本語 Español Français Deutsch Português 한국어 العربية Türkçe Русский Italiano Polski Tiếng Việt Bahasa Indonesia ไทย Nederlands Română Ελληνικά 简体中文 繁體中文
Processed locally Choose an insole later
1 / 3 Upload a foot scan to begin Choose Left, Right or Both, then select one STL.
No insole selected
Choose later
Prepare the foot surface first Then upload a paired or single-side insole STL.
SAME SCALE
100 mm — px
Foot scan
Waiting
Upload a foot scan Then turn the bottom of the foot toward you.
Drop to import STL
Waiting for scan Drag to rotate · Scroll to zoom
MEASUREMENTS Foot surface × insole

Millimetres · one side at a time

ACTIVE FIT Not aligned yet
Scale
—
Plan overlap
—
Fit gap
—
Fit status
Waiting
Align an insole to enable export.
L Left foot Not in this fit
Length
———
Max width
———
Waiting
R Right foot Not in this fit
Length
———
Max width
———
Waiting
QUICK START · 5 STEPS

Compare a foot scan and insole, step by step

Follow the workbench from your first STL to an aligned insole export.

Wizualne przejście przez wnoszenie skanowania stóp, sprawdzanie i potwierdzanie powierzchni plantaru, wybór wkładki, dostosowanie jej, przełączenie na rzeczywisty rozmiar 1: 1, oraz znalezienie kontroli eksportu.
ANIMATED WALKTHROUGH Loads when this guide opens Five steps · from scan to export
Use the numbered workflow in the workbench as your guide.

  1. Upload your foot scan

    Choose Left, Right, or Both, then upload one foot-scan STL.

  2. Orient and confirm the sole

    Rotate until the sole faces you. Select Use this view, check that teal covers only the sole, then select Looks right.

  3. Upload an insole

    Ergono3D pair is selected first and by default. Upload one paired STL, or choose Left or Right for a single-side file. If a paired file is reversed, use Swap insole L / R before aligning; the same control restores automatic detection.

  4. Align and compare

    Select Align insole to open the overlay. Contour preview scales only the insole copy; use Actual size 1:1 to review model dimensions.

  5. Export the fitted insole

    Review the geometric summary, then select Export fitted STL to save the aligned copy.